RING SIZE GUIDE

Method 1 

This will be extremely helpful for you to determine the ring size that you need. You can either make use of a tape or a small piece of string to measure the area that will be occupied by the ring. When it becomes a complete circle, make a mark on such string. This will be helpful for you to compare with the chart that is mentioned below. For extra width, you can add another size to accommodate.

Method 2

If you have a ring that fits your finger it can also be considered in determining the appropriate ring size. It measures inside the diameter of such ring in millimeters. This is normally used for double checking your results from the usual paper method. Apart from this, you can also make use of the ring that you wear daily and cross check the same with below chart.

Method 1

Step 1
– Cut a thin strip of paper or thread

– Wrap around your finger
Step 2
– Measure the length of the thread

– Compare the
CIRDUMFERENCE to determine your ring size

Method 2


– Measure the inner diameter of your ring – Compare the DIAMETER from the chart to determine your ring size
RING SIZING CHART
Ring Size (Indian)
Circumference
Diameter
4
1.72” (43.6 mm)
0.55“ (13.9mm)
5
1.76” (44.8mm)
0.56” (14.3mm)
6
1.81” (46.1mm)
0.58” (14.7mm)
7
1.87” (47.4mm)
0.59” (15.1mm)
8
1.89” (48mm)
1.72” (43.6 mm)
9
1.92” (48.7mm)
1.72” (43.6 mm)
10
1.97” (50mm)
1.72” (43.6 mm)
11
1.72” (43.6 mm)
1.72” (43.6 mm)
12
1.72” (43.6 mm)
1.72” (43.6 mm)

BANGLE /BARCELET SIZE GUIDE

Method 1 

This will be extremely helpful for you to determine the bangle/bracelet size that you need. Measure your hand, you will need a measuring tape or a piece of paper and a ruler. Bring your thumb and little finger together and measure were your hand is the widest as shown in the picture.

Method 2

If you have a bangle or bracelet that fits it can also be considered in determining the appropriate size. Measure the inside diameter of a bangle that you already own. It measures inside the diameter of such bangle in millimeters. This is normally used for double checking your results from the usual paper method. Apart from this, you can also make use of the bangle that you wear daily and cross check the same with below chart.

Method 1

Step 1
– Cut a thin strip of paper or thread
– Wrap around your palm
Step 2
– Measure the length of the thread

– Compare the CIRDUMFERENCE to determine your bangle/bracelet size

Method 2

– Measure the inner diameter of your bangle/bracelet
– Compare the DIAMETER from the chart to determine your size
BANGLE SIZING CHART
BANGLE Size (Indian)
Circumference
Diameter
2 – 2
1.72” (43.6 mm)
0.55“ (13.9mm)
2 – 4
1.72” (43.6 mm)
1.72” (43.6 mm)
2 – 6
1.72” (43.6 mm)
1.72” (43.6 mm)
2 – 8
1.72” (43.6 mm)
1.72” (43.6 mm)
2 – 10
1.72” (43.6 mm)
1.72” (43.6 mm)
2 – 12
1.72” (43.6 mm)
1.72” (43.6 mm)
2 – 14
1.72” (43.6 mm)
1.72” (43.6 mm)
3
1.72” (43.6 mm)
1.72” (43.6 mm)
BARCELET SIZING CHART
Barcelet Size (Indian)
Circumference
Diameter
XXS
1.72” (43.6 mm)
0.55“ (13.9mm)
XS
1.72” (43.6 mm)
1.72” (43.6 mm)
S
1.72” (43.6 mm)
1.72” (43.6 mm)
M
1.72” (43.6 mm)
1.72” (43.6 mm)
L
1.72” (43.6 mm)
1.72” (43.6 mm)
XL
1.72” (43.6 mm)
1.72” (43.6 mm)
XXL
1.72” (43.6 mm)
1.72” (43.6 mm)
Close ✕

categories

  •  (12)
  •  (25)
  •  (20)
  •  (12)
  •  (17)
  •  (16)
  •  (103)
  •  (27)
  •  (11)
  •  (26)